Frequently Asked Questions

The MeasureOn app can be downloaded in the Apple App Store and in the Google Play Store.

Go to “Settings” → “Video tutorial”.

The app is available for Android and iOS tablets and smartphones. Other operating systems are not supported.

Supported Android devices: Bluetooth®-enabled smartphones and tablets from Android with Android 8 or higher.

Supported iOS devices: iOS 11 or higher.

On iOS, MeasureOn needs access to your Bluetooth settings, as this is needed to establish a connection between the App and a device. Furthermore, MeasureOn requires access to your camera for the photo markup function.

On Android MeasureOn needs access to your Bluetooth settings, as this is needed to establish a connection between the App and a device.

Go to “Settings” → “Contact us”, to write us an email at Support.MeasureOn@bosch.com and ask a question.

Yes, you can easily use MeasureOn in offline mode. Any changes to your project will be stored locally on your smartphone / tablet.

For connection to our thermal devices, download the app “Bosch Thermal Connect"

All Bosch laser range finders including a „C in their name“, e.g. PLR 30 C, GLM 50 C Professional etc.

First, make sure that Bluetooth® is activated on the measuring tool and on the smartphone / tablet and that the devices are within range. After that, you can tap on the Bluetooth® icon and your device will be visible in the menu. To connect with your device for the first time, tap on “connect” in the Bluetooth® menu. Please note that the connection must always be established via the app, not via the settings menu of your smartphone / tablet.

If the tool has been connected to the app before, it will reconnect automatically.

You can only connect one device at a time.

Depending on on-site conditions (obstacles, sunlight, etc.) and your smartphone / tablet, it is possible to maintain a connection between your smartphone / tablet and the measuring tool from 10 to approximately 30 meters.

Please check in the settings on your iPhone / iPad whether the Bluetooth® permission for MeasureOn has been granted, which is a prerequisite for a successful connection. Go to “Settings” → “MeasureOn” → Enable Bluetooth.

It is also important that the connection is established directly in the MeasureOn app and not in the settings of your smartphone/tablet. If you have connected your laser range finder in the settings of your smart phone / tablet, please disconnect it there and connect it directly in MeasureOn.

If you are still having problems with the connection, please contact us at Support.MeasureOn@bosch.com .

Check whether the permission for location services for MeasureOn are granted on your Android device and GPS is enabled. This is a Google requirement in order to connect Bluetooth. We as Bosch don’t get access to your location, as this is an Android prerequisite. Furthermore, establish the Bluetooth connection directly in the App and not in the general settings.

If you are still having problems with the connection, please contact us at Support.MeasureOn@bosch.com .

In projects, you can create multiple workspaces and add further details such as project information and a project picture. It helps managing and categorizing multiple workspaces.

Within a project, you can organize multiple workspaces. Additionally, you can add project details and a project picture. Workspaces can be assigned to other projects or the home screen at any time. A workspace is a place for organizing your measurements, floor plans, photo markups and notes.

Go to the home screen and tap on the three dots on the top right of the project, you want to rename. Then select “Rename”.

It indicates the number of workspaces in the project.

Click on the three dots on the top right of the project and select “Make a copy”.

Click on the three dots on the top right of the project and select “Delete”.

The demo project shows you the main applications of the app and synchronizes with the cloud after login with your Bosch ID.

Additional workspaces cannot be added to the demo project.

Workspaces from the demo project cannot be moved to the home screen or other projects.

Within a project, you can organize multiple workspaces. Additionally, you can add project details and a project picture. Workspaces can be moved to other projects or the home screen at any time.

A workspace is a place for organizing your measurements, floor plans, photo markups and notes.

A workspace is a place for organizing your measurements, floor plans, photo markups and notes.

Drag and drop an attachable element on the border or tap on the border directly and the plan will increase in size.

You can attach a workspace to a project by assigning the workspace via drag and drop to an existing workspace or project. Alternatively, you can tap on the three dots on the respective workspace and select “Move”. Then you can tap on the workspace or project, you want to attach the workspace to, and select “Move workspace here”.

Yes, dragging a workspace onto another will create a new project, which includes the two workspaces.

Tap on the three dots on the top right of the project and select “Make a copy”

Tap on the three dots on the top right of the project and select “Rename”.

Tap on the three dots on the top right of the project and select “Delete”.

Go to a workspace → Tap on the “+” button → “Room sketch”.

In sketch mode, you have the possibility to draw walls, whereas in measure mode, you can add details to your plan, adjust angles and walls, view walls and add measurements to your sketch.

If the sketch is incomplete and the room is open, you can freely switch between sketch & measure by tapping the icon at the top of your screen.

If the sketch is complete and the room is closed, you must delete a wall to go back and edit your sketch.

You can tap on one wall, delete it and after that, switch to sketch mode, which will allow you to redraw the wall.

You can adjust angles, straighten walls or delete walls by editing your sketch in measure mode.

Tap on wall → “Add door” or → “View wall” → Tap on the “+” button” to add a door.

A pink square indicates that the wall has no measurement value assigned to it yet.

Your measurements will automatically be shown on the bottom of the screen. If you want to view the whole measurement list, swipe all the way to the left and select view all. In this view, you will also have the option to share the measurements.

If you want to measure first and assign the value later, you can measure and drag the value onto a wall in measure mode. If you want to assign the measurement directly, you can select a wall and then make the measurement, in which case the value will be assigned to the selected wall automatically.

Tap on wall → Select “Wall length”.

Tap on the sketch and select “Rename”.

Yes, you can sketch as many rooms in a workspace as you want.

Yes, if it is geometrically possible.

Wall view makes it easier for you to visualize the walls you have in your floor plan. In wall view, you can see all the statistics of your wall as well as add doors and windows and decide where you want to put them.

Go to a room sketch and select a wall, then click on “View wall”.

In Wall view → Tap on the “+” button” to add a door or window.

To change the dimensions of a door or window, tap the small blue dot on the edge of the wall corresponding to the width or height of the element.

Go to a workspace → Tap on the “+” button → “Photo”.

Go to a workspace → Tap on the “+” button → “Photo” → “Choose from library”.

Draw an object (arrow, rectangle) onto your photo and measure the distance. The value will be added to the object automatically. If you want to assign already measured values to the photo, you can drag the measurement values shown on the bottom of your screen onto the object. For adding manual measurements, tap on the object and manually add the value.

Tap on the photo and select “Rename”.

File formats depend on your system, but you can mainly import .jpeg and .png files. Please note, that the file must not be over 50 MB.

After entering the workspace click and hold on the photo and release it onto a sketch.

Go to a workspace → Tap on the “+” button → “Note”.

Go to a workspace → Tap on the note and select “Share”.

After entering the workspace click and hold on the note and drag it onto a sketch.

Your measurements will automatically be shown on the bottom half on the screen in the room sketch, photo or notes menu. If you want to view them in a list and share them, swipe all the way to the left and select “View all”.

If you want to measure first and assign the value later, you can measure and drag the value onto a wall in measure mode. If you want to assign the measurement directly, you can select a wall and then make the measurement, in which case the value will be assigned to the selected wall automatically.

While editing → Tap on wall → “Wall length”.

Draw an object (arrow, rectangle) onto your photo and measure the distance. The value will be added to the object automatically. If you want to assign already measured values to the photo, you can drag the measurement values shown on the bottom of your screen onto the object. For adding manual measurements, tap on the object and manually add the value.

Tap on the Bluetooth icon on the bottom left and select “turn on”. You can now tap "measure" to capture remote measurements.

Your remote measurements will be added automatically to the measurement list. This feature is only available for GLM C laser range finders.

You can choose between exporting your work as a .jpeg, .pdf or .xls, depending on what you want to export.

You can export measurements or floor plans.

To export measurements: Scroll to the right of your measurement list and tap "show all" and then "share."

To export floor plans, tap the floor plan in your workspace and hit "share" directly.

The floor plan adjusts automatically to the biggest possible scale, which fits on paper, to display the plan as big as possible.

The projects and workspaces are being saved automatically.